AC Condenser Fan Not Spinning
Nothing can dampen your enthusiasm for a summer in Phoenix like an air conditioner that doesn’t keep your home cool and comfortable. If you live in an area where conditions are hot and muggy for most of the year, like the Valley of the Sun, this is an even bigger problem. In addition to the rise in temperature, a malfunctioning unit allows the humidity to build up in your home, compounding the discomfort. In extreme cases, the moisture can damage your home’s interior and exterior, as well as reduce indoor air quality. A malfunctioning unit is more expensive to run as well since it is less efficient overall.
In order to diagnose a problem with your outdoor AC unit fan not spinning, you need to understand how your central unit works. Your home has something in common with the walls of your refrigerator. They both contain the cooler air that the air conditioning unit blows into your home. Your outdoor air conditioner unit has two fans. The one on the inside of the unit blows cold air into the house. The one on the outside blows air across the coils to remove the heat from the air to cool it. When either of these fans is not functioning correctly, the efficiency of your unit is compromised. You may be wondering why your compressor fan is not running or why your condenser fan is not spinning. If the compressor fan is not running, you may not be getting power to the AC unit. If the condenser fan is not spinning, the motor may be the issue.
It’s easy enough to figure out if the blades are not spinning on your AC unit or if your outside AC unit is not turning on at all. You can walk outside and listen for a humming sound to tell you that the blades are turning. You can also visually evaluate whether the fan is operating. If you hear the hum but don’t see the blades moving, you may have a capacitor problem.
If you observe the AC condenser fan not spinning on your outdoor air conditioning unit, the problem is likely one of a few common things.
- If the compressor is working, but the fan won’t turn, then the problem is most likely with the motor and/or capacitor.
- When an AC fan is not spinning and no audible indications of compressor activity are detected, it is usually due to a lack of power or a malfunctioning compressor contactor.
JUMP TO:
Understanding Your Outdoor Air Conditioning Unit
Inside your Phoenix air conditioning unit, the fans turn with the assistance of motors and capacitors. You can think of the motor on a fan just like the motor in your car. Its job is to cause motion, and that motion moves the air. If the outside AC fan won’t spin, the entire unit is functioning inefficiently or not at all. Without the fan, the conditioned air doesn’t get moved throughout your home the way it should in order to keep the temperature and humidity under control.
If the motor is comparable to an automobile’s engine, the capacitor is comparable to the battery. The capacitor stores up energy in order to carry out its duties. The two most common types of capacitors are the run and start varieties. As you can guess from the names, run capacitors keep something running, while start capacitors provide a burst of energy to the motor to start the fan. Inside your Phoenix air conditioning unit, capacitors are paired with the indoor and outdoor fans and the compressor. The reason each component has a capacitor is that getting the fan to start turning requires more energy than keeping it spinning.
When capacitors fail, it’s usually because they lose their ability to hold a charge. Over time, the capacitors simply don’t retain energy as well. When you add in factors like exposure to extreme heat or high voltage, you can see how easy it is for external factors to cause this type of damage as well. To avoid having your outside AC unit fan not running preventive maintenance is the best way to go. Also, if the capacitor goes out on a fairly new air conditioner unit, check your warranty documentation. Most companies do provide coverage for the capacitor for a limited period of time.
The Compressor is Running but AC Fan is Not Spinning
The fan motor and the start capacitor work together to turn the fan inside your Phoenix air conditioner unit. If that isn’t happening, then the motor and/or capacitor may have malfunctioned. You may wonder, “What does a start capacitor do in this situation anyway?” This component’s job is to provide a burst of electricity to get the fan motor running. If it’s not working correctly, the AC fan outside won’t be spinning and the AC motor won’t turn the blades, and the necessary air movement doesn’t occur.
While you should always be careful with electrical appliances, a few things are worth checking yourself to see if you can remedy the problem with a simple fix.
- Look to see if some type of debris might be wrapped around the fan axle. If so, remove it carefully, being careful not to damage the components.
- The bearings of the motor may need cleaning. If sludge jams the workings, the fan gets stuck or slows down. This puts stress on the motor and may burn it out. If you do need to clean the motor bearings, do this carefully so as not to damage the internal workings of the unit.
- If you are experiencing an issue with a fan not spinning on an AC unit, it may be due to a broken or loose belt. This problem is more common with older units, as newer models tend not to use fan belts. Upgrading to a new AC unit might be a good option if you have an older unit. However, if you choose to replace the belts, you can find the right specifications in your unit’s documentation and purchase replacements at most home improvement stores.
- Whether you’re talking about the ones inside your home or the ones outside that are a part of the unit itself, a dirty air filter blocks air from flowing through. As a result, ice can accumulate inside the machine and put undue pressure on the components. Replacing the filter is the easiest way to remedy this; you can find a replacement at your local hardware or home improvement store.
- You can possibly get the fan turning by pushing the fan a little with a stick or a similar object. The handle of a wooden kitchen spoon can be helpful. Do not use your fingers, though, or you may be seriously injured by the blades. Also, you should never use any metal object or any other material that will conduct electricity. If you are able to get the fan running like this, then the capacitor is probably the problem, since there is enough energy to keep it going once it’s started.
If you can’t get the fan started with any of these tips, turn off your system rather than allowing it to continually try to run. This can cause overheating and the destruction of the compressor itself, which is costly to replace or repair. Also, it’s important to note that even if these tricks do work, they may only be temporary solutions, and you should still call a technician as soon as possible to check everything out.
Capacitor Reset
It’s possible to inspect the capacitor itself; however, you should never attempt this yourself unless you are comfortable and have experience with high voltage machinery and electrical currents. Since they store energy, capacitors can cause electrical shock even if the unit itself is turned off. Learn how to discharge the energy from the capacitor before you attempt repairs yourself. Also, do not touch the terminals, or you risk serious injury.
The best plan is to call in a professional Phoenix air conditioning expert at Day & Night Air, but if you just want to get a visual idea of what might be happening, here are some basic steps to performing a visual inspection.
- Turn off the electricity to the unit either at the disconnect or the breaker box. Don’t try anything else unless you are certain that the power is off.
- Find the service panel on your AC unit. Look for the capacitor; it will be a small round or cylindrical object with two or three prongs on the top.
- If you can safely see the capacitor, look for signs of trouble such as leaking, swelling of components, or rust.
- For your safety, do not touch the terminals or any leaking fluids.
- If you determine that the capacitor is damaged, call a professional for assistance. Though you can try to change it out yourself, this is a dangerous task involving high voltage.
The AC Fan Is Not Spinning
If no sound is coming from the compressor and the fan isn’t turning, then you may not be getting power to the unit itself and your AC fan is not working. Check the obvious first. Is the breaker to the unit tripped? If so, use the thermostat to turn off the unit and reset the breaker. Then turn the unit back on at the thermostat and see if that corrects the problem.
If that doesn’t work, then the problem may be with the compressor contactor. This is a part of the unit that sends power to the AC fan motor and the compressor. You should not try to fix this yourself. Call a professional Phoenix air conditioning repair company to get the work done safely.
Call the Phoenix AC Repair Experts Near You
If your air conditioning unit goes out, you may not want to spend much time trying to find the problem and fix it yourself. You need to get your home back to a comfortable state as soon as possible for the health and enjoyment of your family. The best plan is to contact a competent professional Phoenix AC repair expert like Day & Night Air and let us do what we do best. However, you can assess the situation by looking and listening to determine if the fan is running or not, and if the compressor is operating as it should. By narrowing the situation down for the technician who comes out to perform the repair, you can save yourself time and frustration.
Barbara CristJune 3, 2024Wonderful company. Have used Day & Night for 20 years. Always happy with service and technicians. Prompt, efficient and very knowledgeable.
Pam KishJune 3, 2024Tim is a great asset to your company.
James KernenJune 3, 2024Wellington was great from beginning to end. Took the time to walk me through everything and completed the work very efficiently.
Tommy RycerskiJune 3, 2024Wellington was professional and friendly
Gina MontionJune 3, 2024Joshua was a very good plumber. He did a great job and I was very satisfied with his work.
Janel YanezJune 3, 2024We had to have the drain pipe for our washing machine replaced because it was very old and full of corrosion, causing a clog. Our Day & Night technician, Alfredo Esquer, performed the work in less than two hours. It all looks great and it's nice to have things back in working order.
Dante ShurJune 2, 2024Personable and knowledgeable
Bailey DawsonJune 2, 2024David was excellent. He was very informative in a way that I could understand as to what was wrong with my AC unit and what needed to be repaired! He was very kind and understanding in answering all of my questions.
Jordan CookJune 2, 2024Day and night has been nothing but wonderful customer service and deliver on everything they say they’re going to do. Andrew was great today running our installation and Jimmy did amazing with figuring out exactly what we needed. We couldn’t be happier and highly recommend them for all your ac and plumbing needs.
